Personal tools

Difference between revisions of "Sc12 ipc@chip"

From Eth0Wiki

Jump to: navigation, search
Line 101: Line 101:
 
* http://nurdspace.nl/IPC@Chip_boards
 
* http://nurdspace.nl/IPC@Chip_boards
 
* https://wiki.bitlair.nl/Pages/Projects/SA12_IPC@CHIP
 
* https://wiki.bitlair.nl/Pages/Projects/SA12_IPC@CHIP
 +
 +
== IRC ==
 +
* network: oftc (irc.oftc.net)
 +
* chan: #SC12

Revision as of 16:10, 17 January 2012

This is a page about the boards SA007 brought to eth0:winter 2k12.

Specs

OUI vs Serial#

  • OUI 00:30:56 'Beck IPC GmbH'
  • MacAddr format: 00:30:56:fx:xx:xx, the xxx is (24 bit) serial number, written as 5 characters (hex).

Example:

A:\>ver
...cut...
Target=SC12 Serialnumber=xxxxx
...cut...
A:\>
Interrupt 0xA0 service 0x00: Get serial number.
http://isa.umh.es/temas/micros/doc/sc12/doc/biosints.htm#0xA00x00
Interrupt 0xA0 service 0x17: Get MAC address of the Ethernet interface
http://isa.umh.es/temas/micros/doc/sc12/doc/biosints.htm#Interrupt_0xA0_function_0x17__Get_MAC_address_of_the_Ethernet_interface

Memory map says: 0400h - 04FFh for MAC Address. Possible to change MAC addr (plz check later)? I guess that 'on boot, the default mac == serial'. And that we could configure it via program at boot?

Chip.ini

[IP]
NETMASK=255.255.255.0
ADDRESS=10.10.1.61
DHCP=1
[TELNET]
USER0=tel
PASSWORD0=IPC-03
[FTP]
USER0=ftp
PASSWORD0=IPC-03
[STDIO]
STDIN=TELNET
STDOUT=TELNET

More? See http://isa.umh.es/temas/micros/doc/sc12/doc/config.htm

Pinout / Board desc

Top view

IPCboard-top.png

  1. (J5) +5v
  2. (J5) GND
  3. (J5) NC (not connected)
  4. (J5) NC
  5. (J5) NC
  6. (J5) NC
  7. (J5) Input optocoupler U1
  8. (J5) Input optocoupler U2
  9. (J4) NC
  10. (J4) NC
  11. (J4) NC
  12. (J4) NC
  13. (J4) NC
  14. (J4) NC
  15. (J4) NC
  16. (J4) NC
  17. (J7) Output optocoupler U2
  18. (J7) Output optocoupler U2
  19. (J2) rs422 green -> max488 pin 5 (Y)
  20. (J2) rs422 white/green -> max488 pin 6 (Z)
  21. (J2) rs422 orange -> max488 pin 7 (B)
  22. (J2) rs422 white/orange -> max488 pin 8 (A)
  23. (J6) Output optocoupler U1
  24. (J6) Output optocoupler U1

Bottom view

Note:

  • Pin17 @ SC12 = Link Led (connected to red led)

Links

Hackerspace working on/with them

IRC

  • network: oftc (irc.oftc.net)
  • chan: #SC12